New 2009 6 CH 2.4GHz Esky Belt-CP CCPM 3D Aerobatic Radio Remote Control Electric RC Helicopter RTF w/ Brushless & Li-Po

This is the brand new 6 Channel 2.4GHz ESKY BELT-CP .... Step up to a larger collective pitch heli than the Honey Bee CP2 or King II with the Belt CP. The Belt CP has a belt-driven tail rotor for smooth, vibration free tail control. The Belt CP is the new range developed by Esky. This is a RC helicopter with a small budget and a massive bite. It has been developed to rival the Trex in terms of capablilites and the Falcon 3D in price.

New 2.4G Spread Spectrum technology allows the transmitter and receiver to be 'locked-on' to the same frequency ensuring much improved reliability and peace of mind when flying. Second, 2.4 Gigahertz systems offers quicker, more responsive control, when compared to a standard frequency system. Third, Operating at 2.4 Gigahertz also puts the radio control out of the frequency range of any 'noise' caed by the other electronic components on your helicopter - such as the motor, speed controller and any metal to metal noise - eliminating interference and glitching that can affect traditional frequency system. Fourth, another main characteristic of 2.4 Gigahertz equipment from a RC model club’s point of view is that no frequency control is needed. Eliminating the need to check everyone else's channel numbers, prior to flying. No more worries about turning up at a club with the wrong crystal in your Tx.

As for a gyro, no more 4 in 1 units, as with other Micro heli's; the Belt-CP is setup with a stand alone Esky gyro, which is far better suited for the performance this helicopter has to offer.

This helicopter is incredible value for money and will suit everyone from the cautio and eager to progress beginner all the way up to the more experienced pilot. (Some previo flying experience is recomended as this helicopter is not a toy).

In short the E-SKY Belt-CP is one of the best value helicopters on the market today, buy one and you will not be disappointed!

With the stock RTF kit, which comes with everything you need for flight, you simply won't find a better helicopter in this class. Capable of many aspects of aerobatic flight, the Belt-CP is perfect for those wanting more out of their current helicopters, or for those looking for a helicopter that will not be outgrown. For those wanting more out of a Micro class helicopter, the Belt-CP is the one to have.

The Belt-CP comes RTF (Ready To Fly) out of the box with no assembly required. Kit includes everything needed for flight, and is setup & ready to go.

Feature:

• New 2.4GHZ 6 channel Transmitter with PIT and PLT mode lock switch, adjustable knob , and multistage electricity volume show on the panel
• 6 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
• New 2.4 GHz Spread Spectrum Transmitter, Reliable Spread Spectrum Mixer/Gyro Control, More Stable Flight, Even First Timer can Control Easily
• New 2.4GHz technology, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time
• New quick responsive 8g digital micro servos
• High performance 3800KV Brushless motor used as the main drive
• Powerful 11.1V 1800mAh 20C high capacitance Li-Po battery provide enough power for any aerobatic flight
• Improved Body Frame(Strong & Light)
• Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing
• Perfect for people who wants to move up from 4ch helicopter
• Perfect for intermediate pilots or pilots who want to try inverted fly or 3D aerobatic flight
• CCPM mixing control system and collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights
• 120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced
• Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds
• O-ring inside the center hub reduce oscillation of main blades
• The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage
• Hard, Light weight Main Blades
• Brand new design for the structure
• Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying
• Tail rotor driven by belt provide stable flight and low noise
• NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-Helicopter
• No need to worry about burning tail motors
• Light and hardened wood blades provide great lift, only weight 11g
• Outer placed professional gyro
• With length-adjustable servo push-rod, precision sub trim can be easily set
• Extended tail boom, reduced the load of tail motor
• Separate main shaft and main gear reduce repair time and noise
• Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the load of whole helicopter
• Almost Unbreakable Rotor Head
• Easy to fly and more stable lifting
• 2.4GHZ PCM receiving and transmitting system increases the operation stability
• CCPM mode with adjustable pitch system and 3D conversion
• Provide excellent performance outdoor and indoor
• Tail blade adopt flameout landing system
• Metal ball swashplate has improved the stability and sensitive of the whole machine
• Newly Designed Rotor Head gives better control
• Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw and easy to install
• Extreme smooth control and stable flight
• Precise controlling and hovering
• Can fly in skyway, backward, and 3D aerobatic
• Digital Proportional Motor Speed Control
• Suitable for Indoor/Outdoor/Backyard/Stadium
• Using the Ultra tough Carbon Fiber materials, the Helicopter does have very strong structure. In addition, the main rotor blades are using top quality wood materials, which is extremely light and not easily break.
• Approximately 20 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time.
• Best choice for Beginner - Advanced hobbyist
• All spare parts and accessories are available
• Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA batteries for the transmitter also included
• Professional Lifetime Tech Support only at Rc-Shops.com

Specification:

• Main Rotor Diameter: 680mm (27 inch )
• Tail Rotor Diameter: 130mm (5 inch)
  
• Length: 650mm (26 inch)
• Height: 230mm (9 inch)
• Flying Weight: 670g (24 oz)
• Drive System: 3800KV Brushless motor
• Rotate Ratio: 12:140/10:22
• Servo: 4x quick responsive 8g micro servos
• Speed Controller: 25A Brushless ESC
• Battery: 11.1V 1800mah 20C 3-Cell Li-Polymer
• Control system: New 2.4GHZ 6CH CCPM Multifunctional FM Transmitter and 2.4GHZ Receiver
• Radio Control Range: 2500 feet (762m)

Package Include:

• Helicopter (100% Assembled)
• 2.4GHZ 6 Channel CCPM Multifunctional FM R/C Transmitter (8 AA batteries included)
• 100-240V Wall Battery Balance Charger with Auto Cut-Off
• 11.1V 1800mah 20C 3-Cell Li-Polymer Rechargeable Battery
• Flight Simulator Software and USB PC Cable
• Optional: Esky Belt-CP Genuine Aluminum Carrying Case
• English Manual
  

More Pictures